COMPANY HEADER
Print Back
The Dytran 2301C series is a family of high-temperature piezoelectric charge mode pressure sensors with a sensitivity of 0.35 pC/psi. Offered in seven different models with available measurement ranges from 100 to 15,000 psi, the series utilizes a stable quartz sensing element for reliable operation in temperatures up to +500°F (+260°C). Sensors within the series are acceleration compensated to reduce the risk of spurious ambient vibration signals adding to signal output, thus enhancing the transducer’s natural frequency and allowing them to offer a rise time of less than 1.0 microsecond.

Featuring a probe-style design and packaged in a lightweight titanium housing, the Dytran 2301C series incorporates a 10-32 axial connector and a floating clamp nut, for a total weight of just 6.5 grams. Units are also hermetically sealed for reliable operation in harsh or dirty environments.
Unit of Measure

Specifications

Brands

 N/A Dytran

Weight

 N/A 6.5 g0.23 oz

Housing Material

 N/A Titanium

Diaphragm Material

 N/A Titanium

Diameter

 N/A 0.217 in0.551 cm

Sensing Element

 N/A Quartz, Compression

Sensitivity

 N/A 0.35 pC/psi0.05 pC/kPa

Measuring Pressure Range

 N/A 15000 psi103421 kPa

Maximum Pressure

 N/A 18000 psi124106 kPa

Resonant Frequency

 N/A 500 kHz

Electrical Isolation

 N/A No

Maximum Shock

 N/A 10000 g98067 m/s²

Temperature Range

 N/A -100 to +500 ºF-73 to +260 ºC

Thermal Coefficient of Sensitivity

 N/A 0.01 %/°F0.02 %/°C

Sensor Type

 N/A Charge Mode

Environmental Seal

 N/A Hermetic

Recommended Mounting Accessories

 N/A One (1) model 6507 hollow clamp nut (supplied) Two (2) model 6600 pressure seals (supplied)

Recommended Cabling Accessories

 N/A Model 6013A or model 6019A low-noise coaxial cable assembly (sold separately)

Features

 N/A +500 ºF (+260 ºC) Operation Acceleration Compensated Charge Mode Fast Rise Time Floating Clamp Nut Small Size Stable Quartz Sensing Element

Applications

Applications

 N/A Blast Measurement General Purpose High-frequency Pressure Measurements High-cycle Environments Shock Tubes

Quality Management System

Quality Management System

 N/A Dytran Instruments Quality Management System meets the requirements of the following standards:
  • ISO 9001:2008 and AS 9100 Revision C and in accordance with requirements of AS9104A
  • ISO/IEC 17025:2005 and ANSI/NCSL Z540-1-1994
  • ATEX DIRECTIVE 2014/34/EU for electrical and mechanical equipment for use in explosive atmospheres