COMPANY HEADER
Print Back
The Dytran 2300C series is a family of high-temperature piezoelectric charge mode pressure transducers with a sensitivity of 0.35 pC/psi, designed for reliable operation in temperatures up to +500°F (+260°C). Available in different seven models, with measurement ranges from 100 to 15,000 psi, the 2300C series utilizes a stable quartz sensing element, packaged in a rugged stainless steel housing with probe-style design, incorporating a 10-32 axial connector and weighing just 6.5 grams. In addition, the Dytran 2300C series is acceleration compensated to reduce the risk of spurious ambient vibration signals adding to signal output, enhancing the transducer’s natural frequency which facilitates an ultra-fast rise time.
Unit of Measure

Specifications

Brands

 N/A Dytran

Weight

 N/A 6.5 g0.23 oz

Housing Material

 N/A Stainless Steel

Diaphragm Material

 N/A Stainless Steel

Diameter

 N/A 0.217 in0.551 cm

Sensing Element

 N/A Quartz, Compression

Sensitivity

 N/A 0.35 pC/psi0.05 pC/kPa

Measuring Pressure Range

 N/A 1000 psi6895 kPa

Maximum Pressure

 N/A 15000 psi103421 kPa

Resonant Frequency

 N/A 500 kHz

Electrical Isolation

 N/A No

Maximum Shock

 N/A 10000 g98067 m/s²

Temperature Range

 N/A -100 to +500 ºF-73 to +260 ºC

Thermal Coefficient of Sensitivity

 N/A 0.01 %/°F0.02 %/°C

Sensor Type

 N/A Charge Mode

Environmental Seal

 N/A Hermetic

Recommended Mounting Accessories

 N/A Two (2) model 6600 pressure seals (supplied)

Recommended Cabling Accessories

 N/A Model 6013A or model 6019A low-noise coaxial cable assembly (sold separately)

Features

 N/A +500 ºF (+260 ºC) Operation Acceleration Compensated Charge Mode Small Size Stable Quartz Sensing Element Ultra-fast Rise Times

Applications

Applications

 N/A Far-field Blast Dynamics Measuring Ultra-fast Rise Time Pressure Events Shock Tubes

Quality Management System

Quality Management System

 N/A Dytran Instruments Quality Management System meets the requirements of the following standards:
  • ISO 9001:2008 and AS 9100 Revision C and in accordance with requirements of AS9104A
  • ISO/IEC 17025:2005 and ANSI/NCSL Z540-1-1994
  • ATEX DIRECTIVE 2014/34/EU for electrical and mechanical equipment for use in explosive atmospheres