COMPANY HEADER
Print Back
The Dytran 2200C series is a family of high-temperature piezoelectric charge mode pressure sensors with a sensitivity of 1 pC/psi and ultra-fast rise times. Offered in six different models, with available measurement ranges from 100 to 15,000 psi, the series utilizes a stable quartz sensing element for reliable operation in temperatures up to +500°F (+260°C). With a probe-style design and rugged stainless steel housings, sensors within the Dytran 2200C series feature a 10-32 axial connector and weigh just seven grams. Sensors are also acceleration compensated to reduce the risk of spurious ambient vibration signals adding to signal output.
Unit of Measure

Specifications

Brands

 N/A Dytran

Weight

 N/A 7 g0.25 oz

Housing Material

 N/A Stainless Steel

Diaphragm Material

 N/A Stainless Steel

Diameter

 N/A 0.217 in0.551 cm

Sensing Element

 N/A Quartz, Compression

Sensitivity

 N/A 1 pC/psi0.16 pC/kPa

Measuring Pressure Range

 N/A 10000 psi68948 kPa

Maximum Pressure

 N/A 15000 psi103421 kPa

Resonant Frequency

 N/A 250 kHz

Electrical Isolation

 N/A No

Maximum Shock

 N/A 10000 g98067 m/s²

Temperature Range

 N/A -100 to +500 ºF-73 to +260 ºC

Thermal Coefficient of Sensitivity

 N/A 0.01 %/°F0.02 %/°C

Sensor Type

 N/A Charge Mode

Environmental Seal

 N/A Epoxy

Recommended Mounting Accessories

 N/A Two (2) model 6600 pressure seals (supplied)

Recommended Cabling Accessories

 N/A Model 6013A or model 6019A low-noise coaxial cable assembly (sold separately)

Features

 N/A +500 ºF (+260 ºC) Operation Acceleration Compensated Charge Mode Small Size Stable Quartz Sensing Element Ultra-fast Rise Times

Applications

Applications

 N/A Far-field Blast Dynamics General Purpose Pressure Monitoring Hydraulics and Pneumatics Liquid and Gas Systems Measuring Ultra-fast Rise Time Pressure Events

Quality Management System

Quality Management System

 N/A Dytran Instruments Quality Management System meets the requirements of the following standards:
  • ISO 9001:2008 and AS 9100 Revision C and in accordance with requirements of AS9104A
  • ISO/IEC 17025:2005 and ANSI/NCSL Z540-1-1994
  • ATEX DIRECTIVE 2014/34/EU for electrical and mechanical equipment for use in explosive atmospheres