COMPANY HEADER
Request Information
This miniature three-channel data logger provides users with an economical and portable solution for recording data from three IEPE sensors, such as acceleration, force, or pressure transducers. This cost-effective model can record on three channels and provides the ability to increase your channel count if measurement requirements change or expand. Users can scale up their channel count by using a cable connection or the unique optical synchronization method that allows multiple units to record simultaneously - when stacked on top of each other.

Model 4600A1 is packaged in a compact and ruggedized aluminum housing. Units are IP64 rated for protection from the ingress of dust and splashing water. The 4600A1 can be mounted with the provided mounting screws or integral high-strength rare earth magnets.
Unit of Measure

Specifications

Brands

 N/A Dytran

Series

 N/A 4600

Physical

Housing Material

 N/A Aluminum Anodized

Maximum Weight (Less Cable)

 N/A 5.3 oz150 g

Mounting Provision

 N/A Magnets Screws

Connector Type

 N/A 10-32 Coaxial

Performance

Maximum Recording Time

 N/A 10 hours

Sampling Rate

 N/A 100 Hz1000 Hz10000 Hz25000 Hz500 Hz5000 Hz

Memory Card Type

 N/A Micro-SDHC

Acquisition Type

 N/A Free Run/Triggered/Time

Synchronized Triggering

 N/A Optical/Cable Transmission

Resolution

 N/A 16 bits

File Size

 N/A 1 to 100 MB

Electrical

Battery Capacity

 N/A 1300 mAh (Rechargeable)

Sensor Current (±10%)

 N/A 2 mA

Direct Current (DC) Sensor Compliance Voltage Range

 N/A 18 to 19 V

Input Voltage

 N/A 5 V

Coupling

 N/A AC

Coupling TC

 N/A > 3 sec

Anti-Aliasing Filters

 N/A 8-Pole Elliptic

Environmental

Discharging Operating Temperature

 N/A -4 to +140 ºF-20 to +60 ºC

Charging Operating Temperature

 N/A +32 to +113 ºF0 to +45 ºC

Maximum Peak Shock

 N/A 1000 g9810 m/s²

Environmental Seal

 N/A Ingress Protection (IP64)

Note for Environmental Seal

 N/A Molded cover and bottom cover with integral sealing gasket must both be installed to meet IP64 rating.

Supplied Accessories

Supplied Accessories

 N/A
  1. Accredited calibration certificate (ISO 17025)
  2. Mounting Screw, Model 6246, 10-32 X 1.25, Qty. 2
  3. Mounting Screw, Model 6694A1, M5 X 0.8 X 35mm, Qty. 2
  4. Charging cable, Model 69126, USB Type A to Micro B, Qty:1

Features

Features

 N/A 3 channels of IEPE data acquisition using standard 10–32 coaxial connectors IP64 rated Portable device with internal rechargeable Li–Po battery for external sensor power Synchronous acquisition across multiple 4600A1 units with optical link or hard wire for channel expansion

Applications

Applications

 N/A Amusement Rides Automotive Testing Environmental Stress Screening Factory Floor Machinery Diagnostics Modal Analysis Product Validation

Additional Information

Additional Information

 N/A The unit can power and record three external IEPE sensors for up to 10 hours on the internal Li-Po battery or can be connected to an external power source through the USB port for extended recording duration. Its small size enables users to operate it in areas where instrumentation space is limited.
  • Records Vibration Up to 10 Hours (3 Channel)
  • Micro SDHC Card Compatible
  • Dual Mounting Configurations
  • Integrated Anti-aliasing Filters

Note

Note

 N/A
  1. Compatible cables include: Model 6010A (10-32 to 10-32), Model 6431AXX (10-32 to 4-pin) Model 6337AXX (10-32 to SMB), Model 6772AXX (10-32 to M3 X 0.35 Conn), Model 60153AXX (Synchronization Cable) etc.
  2. In the interest of constant product improvement, we reserve the rights to change the specifications without notice. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary overtime. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts.
  3. Micro-SD card supplied.
Units on the line drawing are in inches, units in brackets are in millimeters.