Maximum Weight (Less Cable) |
N/A 1.8 oz52 g |
Connector Type |
N/A 4-Pin |
Note for Connector Type |
N/A Mates with Glenair connector 800-006-16-Z16-4SN. Dytran cable model 6380AXX |
Thru Hole Mounting Provision |
N/A Ø.195 Inch Ø4.95 mm |
Sensing Element Material |
N/A Quartz |
Sensing Element Mode |
N/A Shear |
Material |
N/A 300 Series S.S. |
Maximum Peak Vibration (±) |
N/A 12000 g117720 m/s² |
Operating Temperature Range |
N/A -67 to +302 ºF-55 to +150 ºC |
Environmental Seal |
N/A Hermetic |
Maximum Peak Shock (±) |
N/A 15000 g147150 m/s² |
Transducer Electronic Data Sheet (TEDS) Operating Temperature |
N/A -40 to +185 ºF-40 to +85 ºC |
Base Strain Sensitivity |
N/A 0.003 g/µε0.03 m/s²/µε |
Resonant Frequency |
N/A >30 kHz |
Full Scale (F.S.) Linearity (±) |
N/A ±1 % |
Note for Full Scale (F.S.) Linearity (±) |
N/A Measure using zero-based straight line method, % of F.S. or any lesser range |
Maximum Transverse Sensitivity |
N/A <6 % |
Peak Acceleration Range (±) |
N/A 10000 g98100 m/s² |
Frequency Response at ±3 Decibel (dB) Bandwidth |
N/A 0.2 to 6000 Hz |
Maximum Root-Mean-Square (RMS) Noise Floor |
N/A 0.04 g0.4 m/s² |
Frequency Range ±10% |
N/A 0.4 to 4000 Hz |
Frequency Response ±5% |
N/A 0.6 to 3000 Hz |
Sensitivity ±20% |
N/A 0.5 mV/G0.05 mV/m/s² |
Note for Sensitivity ±20% |
N/A Measured at 100Hz, 1Grms per ISA RP 37.2 |
Discharge Time Constant |
N/A 0.8 to 2.0 sec |
Typical Output Impedance |
N/A 100 O |
Direct Current (DC) Bias Voltage |
N/A 7.0 TO 12 V |
Direct Current (DC) Compliance Voltage Range |
N/A +18 to +30 V |
Ground Isolation |
N/A >1 GO |
Power Supply Current Range |
N/A 2 to 20 mA |
Note for Power Supply Current Range |
N/A Do not apply power to this system without current limiting, 20mA MAX, To do so will destroy the IC charge amplifier |
TEDS Feature |
N/A IEEE 1451.4 |
