COMPANY HEADER
Request Information
  • Ground Isolated
  • Hermetically Sealed
  • Stud Mount
Unit of Measure

Specifications

Brands

N/A Dytran

Frequency Response

N/A 1.3 to 3000 Hz2 to 2000 Hz

Type

N/A Integrated Electronic Piezoelectric (IEPE)

Number of Axis

N/A 3

Physical

Housing Material

N/A Titanium

Maximum Weight

N/A 0.5 oz15 g

Mounting

N/A 10-32 Stud Mount

Connector Type

N/A 4-Pin

Note for Connector Type

N/A Glass to Metal Seal connector. Mates with Dytran cable Model 6967AXX (XX=length in feet).

Connector Material

N/A Titanium

Housing Isolation

N/A Case Isolated

Sensing Element Material

N/A Piezoelectric

Sensing Element Mode

N/A Shear

Environmental

Maximum Peak Shock

N/A 1500 g14715 m/s²

Maximum Peak Vibration (±)

N/A 500 g4905 g

Operating Temperature Range

N/A -60 to 320 ºF-51 to 160 ºC

Environmental Seal

N/A Hermetic

Base Strain Sensitivity

N/A 0.002 g/µε0.02 m/s²/µε

Performance

Sensitivity

N/A 100 mV/g10.2 mV/m/s²

Note for Sensitivity

N/A Measured at 100 Hz, 1 Grms per ISA RP 37.2.

Frequency Response Tolerance

N/A ±10 %±5 %

Resonant Frequency

N/A >25 kHz

Full Scale (F.S.) Linearity (±)

N/A 1 %

Note for Full Scale (F.S.) Linearity (±)

N/A Measured using zero-based best straight-line method.

Maximum Transverse Sensitivity

N/A 6 %

Peak Acceleration Range (±)

N/A 50 g491 m/s²

Root-Mean-Square (RMS) Noise Floor

N/A 0.0008 g0.008 m/s²

Root-Mean-Square (RMS) Spectral Noise at 1 Hertz (Hz) Frequency

N/A 300 µg2,943 µm/s²

Root-Mean-Square (RMS) Spectral Noise at 10 Hertz (Hz) Frequency

N/A 60 µg588.6 µm/s²

Root-Mean-Square (RMS) Spectral Noise at 100 Hertz (Hz) Frequency

N/A 20 µg196.2 µm/s²

Root-Mean-Square (RMS) Spectral Noise at 1000 Hertz (Hz) Frequency

N/A 10 µg98 µm/s²

Root-Mean-Square (RMS) Spectral Noise at 10000 Hertz (Hz) Frequency

N/A 10 µg98 µm/s²

±15 Percent (%) Frequency Range

N/A 1 to 5000 Hz

Electrical

Note for Power Supply Current

N/A Do not apply power to this device without current limiting, 20 mA maximum to do so will destroy the integral IC amplifier.

Compliance Voltage Range

N/A +18 to +30 V

Direct Current (DC) Operating Bias Voltage

N/A +7 to +9 V

Discharge Time Constant

N/A 0.25 to 2.0 sec

Typical Output Impedance

N/A 100 O

Ground Isolation

N/A ≤10 GO

Power Supply Current Range

N/A 2 to 20 mA

Supplied Accessories

Supplied Accessories

N/A
  1. Accredited Calibration Certificate (ISO 17025).
  2. Mounting stud model 6200, (10-32 to 10-32).

Note

Note

N/A Units on the line drawing are in inches, units in brackets are in millimeters.